Lenze 8200 vector and 9300
Service and retrofit solutions for discontinued Lenze drive systems
Lenze 8200 vector frequency inverters and Lenze 9300 servo drives were widely used in industrial drive applications for many years and can still be found in numerous machines and production lines today.
Both series have been discontinued and are no longer part of Lenze’s current product range. However, a fault does not necessarily mean that the entire drive system or machine has to be replaced or modernized.
At Trecon, we have many years of experience with both series. We provide service and diagnostics, keep selected drives and components in stock, and develop tailored solutions for maintaining and retrofitting existing machines.
Lenze 8200 vector
The 8200 vector series was developed as a modular range of frequency inverters for a wide variety of industrial drive applications.
Different function and communication modules made it possible to adapt the inverter to individual machines and integrate it into different control and automation systems.
Because the series was used so extensively, 8200 vector drives are still operating in many conveyor systems, production lines, process equipment and other industrial machines.
For older machines, it therefore often makes sense to first determine whether the existing drive system can be repaired or restored to operation before considering a more extensive modernization.


Lenze 9300
The Lenze 9300 series was designed for more demanding servo applications, positioning tasks and synchronized motion in industrial machinery.
The range included different versions for specific applications, including servo drives, positioning controllers and solutions for electronic cam functions, positioning and motion synchronization.
One of the key features of the 9300 series was the ability to adapt its functionality using configurable function blocks. This means that replacing a drive involves more than just matching the electrical connections. Existing parameters, communication, software logic and the overall operation of the drive system must also be taken into account.
Diagnostics, service and components from stock
When a Lenze 8200 vector or 9300 drive develops a fault, the first step is to identify the actual cause of the problem.
The drive itself is not always the source of the fault. Problems can also be caused by the motor, encoder or feedback system, communication module, power supply, control signals, PLC program or another part of the drive system.
At Trecon, we therefore look at the complete drive and control system whenever necessary.
For both series, we can provide:
- diagnostics and drive repair,
- parameter and settings checks,
- parameter transfer to a replacement unit,
- PLC communication diagnostics,
- checks of communication and function modules,
- drive replacement,
- parameterization and recommissioning.
We also keep selected drives and components for the 8200 vector and 9300 series in stock, which can significantly reduce machine downtime in the event of a failure.
When contacting us, it is useful to provide the identification number or a photo of the device nameplate. This allows us to check service and replacement options more quickly.
Retrofitting machines with older Lenze drive systems
When repairing the existing device or replacing it with an identical drive is no longer the most sensible option, we can develop an individual retrofit solution for the machine and its drive system.
A retrofit is not simply a matter of replacing an older drive with a newer one. The complete functionality of the machine and the interaction between the drive and other components must be considered.
Before preparing a solution, we therefore check:
- existing motors,
- encoders and other feedback systems,
- digital and analog inputs and outputs,
- communication with the PLC,
- existing communication systems,
- drive parameters and functions,
- control, positioning and synchronization functions,
- safety functions,
- electrical and mechanical installation,
- required software modifications.
Based on the existing configuration, we develop a solution that is tailored to the specific machine and the way it operates.
For machines using the 9300 series, we can also assess the possibility of migrating to current Lenze drive technology. Wherever possible, the aim is to retain the existing machine functionality while minimizing changes to the higher-level control system.
The right solution for each machine
There is no single solution that is right for every older drive system.
In some cases, repairing the existing drive is the most practical option. In others, a replacement unit from stock can restore production quickly. For certain applications, a planned retrofit may be the better long-term solution.
Our goal is to find a technically and economically sensible approach that keeps production downtime as short as possible while ensuring reliable operation of the machine.
Lenze Performance Partner – Trecon
As a Lenze Performance Partner, we have extensive experience with Lenze drive technology, from discontinued product series to current drive systems.
For Lenze 8200 vector and 9300 systems, we provide:
- diagnostics and service,
- support in identifying the cause of faults,
- selected drives and components from our own stock,
- parameterization and commissioning,
- support with PLC communication,
- maintenance of existing drive systems,
- tailored replacement solutions,
- planning and implementation of machine retrofits.
With older Lenze 8200 vector and 9300 systems, we do not look at the individual component in isolation. We help find the most suitable solution for the complete machine – from diagnostics and repair to replacement units or a planned retrofit.